Pride Mobility 3-Wire CTS Throttle Potentiometer (ELEASMB7020)

Product Description

Genuine OEM replacement 3-Wire CTS Throttle Potentiometer (Part Number: ELEASMB7020) for select Pride Mobility Go-Go scooters. This is a 3-Wire throttle pot with a female, black square 3-pin connector.

This part directly replaces and supersedes previous part numbers ELEASMB4829, DWR9983H008, DWR9975H011, and DWR9975H011-A.

Description From The Pride Mobility Service Manual: Electronic, assy, throttle pot, CTS w/iso resistor

Important Serial Number Compatibility Notes

For Go-Go Elite Traveller (S40E / S44E):
This throttle only fits units manufactured BEFORE the 193rd day of 2011. You can verify your scooter's build date by looking at the 4th through 8th digits of the serial number located on the seat post (e.g., S80dddyy or S81dddyy).

• 3-Wheel (S40E): Fits units prior to S/N S8019311100FV0
• 4-Wheel (S44E): Fits units prior to S/N S8119311001FV0

For Go-Go Elite Traveller Plus (S53 / S54):
If you are installing this throttle on older units, it REQUIRES the purchase of a new bottom tiller shroud (Part Number: SHDASMB4813) and assembly instructions (INFINFB3022) for proper installation. This requirement applies to:

• 3-Wheel (S53): Units prior to S/N SD213611097FV0
• 4-Wheel (S54): Units prior to S/N SB813611053FV0
• 4-Wheel HD: Units prior to S/N SD313611104FV0

Specifications:

Manufacturer:

Pride Mobility (OEM)

Part Number:

ELEASMB7020

Replaces Part Numbers:

ELEASMB4829, DWR9983H008, DWR9975H011, DWR9975H011-A

Component Type:

Throttle Potentiometer (Speed Pot)

Connector Type:

Female Black Square 3-Pin Connector (3-Wire)