Free Shipping On Most Items Over $40+ (Contiguous US Only) Shipping: Calculated at checkout Shipping Policy
In stock
Quantity
Couldn't load pickup availability
30 Day Return Policy
Fulfillment: Usually ships in 1-2 business days
This Product Is Backed By A 90-day Limited Warranty Against Manufacturing Defects
Product Description
Genuine OEM Pride Mobility replacement Dynamic 10 inch front frame kit for 4-wheel power seat models, Phase 2 (Part Number: KIT2004899). The Pride parts diagram for the 4-wheel front frame with power seat (models ending in 1002) labels this kit as item A1, along with the steering stem frame (MEC1909718, B1 steering stem frame), bearing and race kit (HDWASMB1000, C1), front axle (FRMASMB11388, D1) and tie rod assembly (MEC2402447, E1). It is compatible with the 4-Wheel VA Victory 10 S710V scooters.
Description From The Pride Mobility Service Manual: kit assembly, frame, front, 10 inch, 4WHEEL, Dynamic, SC710 power seat phase 2.
Specifications:
Manufacturer:
Pride Mobility
Part Number:
KIT2004899
Product Type:
Front Frame Kit
Size:
10 Inch
Controller:
Dynamic
Application:
Front Frame, 4-Wheel, Power Seat
Pride Parts Diagram Position:
A1
Compatible Scooters
VA Victory 10 4-Wheel: S710V (models ending in 1002)
California Proposition 65 Warning: Metal Parts & HardwareCalifornia Proposition 65 Warning: Metal Parts & Hardware•Choking Hazard: Small PartsChoking Hazard: Small Parts
⚠️ WARNING: This product can expose you to chemicals including lead, nickel compounds, and chromium, which are known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling internal mechanisms or bare metal hardware. For more information, go to www.P65Warnings.ca.gov.
Choking Hazard: Small Parts
WARNING: CHOKING HAZARD — Small parts. Not for children under 3 years.
Choosing a selection results in a full page refresh.
Opens in a new window.
Anthony Daniell
Correct product, arrived promptly. The video explaining how to troubleshoot was very helpful in diagnosing the problem.
Pride Mobility - Control Box - CTL1707193 - CM310
Robert
This charger is the same one that originally came with my Pride Pursuit 2 scooter. Works perfectly. Some other 24v, 8amp chargers are not compatible with the batteries in this scooter. This is specifically made for the batteries in this scooter. Highly recommended.
Pride 24V 8A Lithium Charger Pursuit 2 SC7312 - ELE2300934
Dona King
Works perfectly! Thank you’
Moto Motion HSW310 Remote Hand Control 10-Button, 5-Pin, USB Replacement
Walter Rate
Worked perfact easy install
Golden Buzz-Around EX GB118/GB148 Front to Rear Harness - MBE-BZ8-MWH
Choking Hazard: Small Parts
Choking Hazard: Small Parts
Choking Hazard: Small Parts
Choking Hazard: Small Parts